Forgetting to remove a faded, dull and worn out pitot cover can jeopardize the safety of you and your passengers. Our very durable 3/4” inside diameter vented plug with its unmistakable Plane Sights Remove-before-Flight Streamer provides a perfect easy-on, easy-off solution. The blazing yellow color of this foot-long, ANSI-compliant and weather-resistant reflective streamer stands out equally well in daylight or darkness under all weather conditions, so it can’t be missed. The poly plug is attached to the streamer’s rugged black oxide coated zinc eyelet with a stainless steel ring. This ¾”plug Fits Cessna 150, 152, 172, 177, 182, 200 series, and 337 models.

Forgetting to remove a faded, dull and worn-out pitot tube cover can jeopardize the safety of you and your passengers. The Plane Sights 5/8” inside diameter vented pitot plug with its unmistakably conspicuous Remove-before-Flight Streamer provides the perfect easy-on, easy-off solution, while protecting against insect and water contamination. The blazing lime green colour of this foot-long, ANSI-compliant and weather-resistant reflective streamer stands out equally well in daylight or darkness under all weather conditions, so it can’t be missed. The plug is attached to the streamer’s rugged black oxide coated zinc grommet with a galvanized steel ring, and is vented to prevent pressurization damage to the pitot static system. This 5/8” Plug Fits Aero Commander, Twin Beach, Bonanza, Cessna 300/400/500, Conquest Series, Grumman, Lear, Mooney, Piper Cheyenne and Navajo aircraft. *PSTS*

If an old red fabric/vinyl REMOVE-BEFORE-FLIGHT streamer could talk it would quietly whisper “Please take me off when you have a moment”.

Unfortunately, low light, grease and shadows lurking below your fuselage or wing have a way of silencing this feeble and often self defeating character at the worst possible time – during your pre-flight!

Enter the rugged and extremely durable XXL Plane Sights Remove-Before-Flight banner. This 19” x 3” lime green microprismatic reflective flag screams ‘GET ME OFF NOW’ louder than an MU2 take-off roll.

Remove-Before-Flight items; they can be burned off in flight. This knock you over the head Banner is for the must-not-be forgotten items like gear pins, turning linkage disconnects and do not operate tags.

Also makes a great gag-gift for that absent minded pilot at your local flying club or airport.

The blazing yellow colour of this foot-long, ANSI-compliant and weather-resistant reflective streamer stands out equally well in daylight or darkness under all weather conditions, so it can’t be missed. Each streamer comes complete with eight inches of size-adjustable, highly visible reflective shock cord and safety clips. The cord is attached to the streamer with a rugged black oxide coated zinc eyelet. These features make the streamer ideal for any remove-before-flight application, including gear pins, cowl plugs, AOA indicator cages, TAT, ice detector and static port covers. .

These Square Style Static Wick Covers protect, usually yellow pronged static wicks from damage on the ground and make wing/elevator tips more obvious, thereby preventing hangar/ramp rash. The blazing lime green colour of this foot-long, ANSI-compliant and weather-resistant reflective streamer stands out equally well in daylight or darkness under all weather conditions, so it can’t be missed. Slide these rectangle covers on for a tight weather resistant fit on Falcon, Hawker, Beechjet, Lear Jet and many other static wicks.

These round style Static Wick Covers protect static wicks from damage on the ground and make wing/elevator tips more obvious, preventing hangar rash. The blazing lime green colour of this foot-long, ANSI-compliant and weather-resistant reflective streamer stands out equally well in daylight or darkness under all weather conditions, so it can’t be missed. Slide these extra long seven inch, round style covers on for a tight weather resistant fit on Citations and many other jets.

Installed and removed in seconds, Plane Sights Static Wick Covers help prevent delays and inconvenience due to hangar rash. Wing tips and static wicks often suffer ramp damage during maneuvers on the ground. Plane Sights extremely obvious and very durable Static Wick Covers make these vulnerable parts highly visible by day or night. Four styles are available to fit just about every corporate or regional jet. Slide these round style covers on for a tight weather resistant fit on your Bombardier Challenger & Global Express. Also works on some small diameter Hawker/Beechcraft static wicks.

Keep your plane safe from unnecessary ground damage. Featuring light reactive trims and tapes, these highly reflective Static Markers are made to improve the visibility of your business jet day or night. Designed to fit perfectly with all rigid static wicks, so removing your wicks after each flight will quickly become a thing of the past. Each Static Marker also features an integrated Marker Fuse, warning you when your plane comes dangerously close to making contact with another object and preventing static wick breakage. Made from UV resistant, heavy-duty ballistic nylon, custom bonded with a soft, non-abrasive inner fabric. Stitched in Rubber grip and ergonomic tabs allow for fast and easy installation and removal. Compact for quick and easy storage.

Every two years, over 8 percent of aircraft suffer ground damage. Now there’s a simple, low-cost way to greatly reduce the risk of delays and disappointments due to “ramp rash” damage. Highly reflective markers make vulnerable wing and elevator tips clearly visible under all conditions, and their projecting “proximity fuses” warn that something is too close before damage occurs. Plane Sights universal wing and elevator markers fit all aircraft from Airliners to light sport aircraft, including models with static wicks and strobe lights. For aircraft with tip tanks, the wing marker opening fits over one end of the tank. Plane Sights aircraft markers are available in sets of two to five pieces, for fitting to wing tips elevator tips and propeller blades. A full set, including its free carrying pouch stows under most aircraft seats. Once initial fitting is done, the markers can be installed and removed in seconds during routine pre- and post-flight walk-arounds.

This durable, weather-resistant orange and yellow reflective cover fits virtually any size pitot tube. It stands out in daylight or darkness under all weather conditions, so it can’t be missed. Universal covers fit any length of tube from the smallest home built ¼” tubes to the largest 1” corporate jet probes. The versatile hook/loop Velcro strap with sewn-in rubberized trim allows the cover to be quickly and securely fastened to the pitot tube. *PSTS*

Package of 10 Universal Static Wick Cover Fuses.