This durable, weather-resistant orange and yellow reflective cover fits virtually any size pitot tube. It stands out in daylight or darkness under all weather conditions, so it can’t be missed. Large sewn-on Velcro tabs keep it securely in place under all conditions. (As seen on the 2009 AOPA 'Let's Go Flying' Cirrus SR22)

Forgetting to remove a faded, dull and worn-out pitot tube cover can jeopardize the safety of you and your passengers. And when cold weather prevents you from installing your pinch-and-insert style blade pitot cover, ice and snow can contaminate your pitot system. Some blade pitot covers also cause damage to paint when the sleve is being forced on and off. The highly conspicuous and very durable Plane Sights Blade Pitot Cover is a perfect fit for any aircraft with a blade-type pitot tube or Piper gear extension mast. Properly installed, it’s guaranteed not to blow off, fade in the sun or wear out for at least two years. Fits Piper, Katana, some Rockwell, late Grumman, Lake 250, and all other aircraft with a blade-type pitot tube. (As seen on the 2008 AOPA “Get Your Glass” sweepstakes aircraft)

The Redfab Cantering Nose Landing Gear (NLG) Adapter allows Lektro 8600, 8700, and 8800 series tug owners to tow sloped / composite / nose wheel fairing equipped aircraft. Towing lug pin caps may be purchased separately for Cirrus SR20 / SR22, Cessna 350 / 400, Cessna 162, and Diamond DA-40 / DA-50 aircraft. The Redfab Receiver must also be purchased separately to tow Cessna 350 / 400, Cessna 162, and Diamond DA-40 / DA-50 aircraft.

This versatile newly re-designed adapter uses high strength interchangeable snap-on, snap-off nylon towing-lug pin caps, which prevent it from scratching wheel pants. The adapter is also light weight (relative to a towbar) and self leveling for easy hook-up, similar to our best selling SR/AA/AG Adapter. More importantly, the new system and procedure eliminates the problem of having to move these cantering/slanted/wheel panted NLG aircraft with conventional towbar or Lektro holdback bar. Pre-order today for first production deliveries available summer/fall 2010.

Finally, a specially designed durable pitot cover for Diamond DA42 and Pilatus PC12 pitot tubes. It stands out in daylight or darkness under all weather conditions, so it can’t be missed. Large sewn-on Velcro strips wrap around the tube base to keep it securely in place under all conditions.

Diamond recommends that operators of their DA40 and DA20 aircraft plug the stall warning air inlet holes on these aircraft while they’re parked on the ground. Developed with feedback from Diamond, the Plane Sights double-sided stall warning plug fits any Diamond DA40, DA50 and DA20, one way or the other. This composite-reinforced, ergonomic stall plug is the perfect all-weather, easy-in, easy-out way to prevent insects and ice from clogging your stall indicator and jeopardizing the safety of you and your passengers. The blazing yellow colour of the firmly attached foot-long, ANSI-compliant and weather-resistant reflective remove-before-flight streamer stands out equally well in daylight or darkness under all weather conditions, so it can’t be missed during your pre-flight inspection.

This adapter allows any Lektro owner to move Cirrus SR2X and Grumman Tiger/Cheetah etc. The new method of moving Cirrus' is quicker and easier than using a motorized towbar, less time consuming/dangerous than using a conventional tug/towbar and safer than the Lektro holdback arm/strut strap. Also, the adapter’s small size eliminates the occurrence of wheel pant scratches caused by cumbersome conventional towbars. The Redfab SR/AA adapter is not only Lektro approved but also noted in the Cirrus Training Guide as an essential interface tool between Cirrus and Lektro tugs. Download the pdf for more info.

Forgetting to remove a faded, dull and worn out pitot cover, or having the cover blow off, allowing insects to contaminate your fuel vents, can jeopardize the safety of you and your passengers. The Plane Sights extremely conspicuous and very durable Light Sport/Homebuilt Pitot Plug Kit provides a perfect fit for many homebuilt pitot tubes, light sport pitot tubes, and aircraft fuel vents. The kit includes several vented plugs so it even works with double-tube systems and is guaranteed not to pressurize your pitot static system. The blazing yellow color of the included foot-long, ANSI-compliant and weather-resistant reflective remove-before-flight streamer stands out equally well in daylight or darkness under all weather conditions, so it can’t be missed. The kit comes complete with three different-sized pitot tube plugs, our unique streamer, and two rust-resistant coated triangle rings. The kit can also be used to prevent insects from plugging your fuel vent, which is known to cause loss of power with Cessna, light sport and home-built aircraft. WARNING: CHECK WITH YOUR AME AND CONSULT YOUR OWNER’S MANUAL BEFORE USING A FUEL VENT PLUG. *PSTS*

Forgetting to remove a faded, dull and worn out pitot cover can jeopardize the safety of you and your passengers. Our very durable 3/4” inside diameter vented plug with its unmistakable Plane Sights Remove-before-Flight Streamer provides a perfect easy-on, easy-off solution. The blazing yellow color of this foot-long, ANSI-compliant and weather-resistant reflective streamer stands out equally well in daylight or darkness under all weather conditions, so it can’t be missed. The poly plug is attached to the streamer’s rugged black oxide coated zinc eyelet with a stainless steel ring. This ¾”plug Fits Cessna 150, 152, 172, 177, 182, 200 series, and 337 models.

Forgetting to remove a faded, dull and worn-out pitot tube cover can jeopardize the safety of you and your passengers. The Plane Sights 5/8” inside diameter vented pitot plug with its unmistakably conspicuous Remove-before-Flight Streamer provides the perfect easy-on, easy-off solution, while protecting against insect and water contamination. The blazing lime green colour of this foot-long, ANSI-compliant and weather-resistant reflective streamer stands out equally well in daylight or darkness under all weather conditions, so it can’t be missed. The plug is attached to the streamer’s rugged black oxide coated zinc grommet with a galvanized steel ring, and is vented to prevent pressurization damage to the pitot static system. This 5/8” Plug Fits Aero Commander, Twin Beach, Bonanza, Cessna 300/400/500, Conquest Series, Grumman, Lear, Mooney, Piper Cheyenne and Navajo aircraft. *PSTS*

Spend less time worrying about jeopardizing the safety of you and your passengers. Featuring light reactive trims and tapes, these highly reflective Prop Markers are made to improve the visibility of your prop and aircraft day or night, helping you prevent the unexpected depreciation of your plane. Prop Markers are easily installed and removed in just seconds, adding virtually no additional time to your walk around. Show line service personnel just how much you care and feel confident about leaving the aircraft. Made from UV resistant Sunbrella, custom bonded with a soft, non-abrasive inner fabric. The compact design and shock cord allow for quick and easy storage without tangling. Sharp, thin profile Propeller tips can be a hazard for people on the ground. A Plane Sights Prop Marker makes the tips and your entire aircraft more visible to people working and playing around your aircraft. This prop marker fits aircraft such as an older Cherokee Mooney or other two blade aircraft with large size rounded tip nose cone. See our nose cone comparison picture for your reference. Alternatively, please contact us for sizing advice specific to your aircraft.

Spend less time worrying about jeopardizing the safety of you and your passengers. Featuring light reactive trims and tapes, these highly reflective Prop Markers are made to improve the visibility of your prop and aircraft day or night, helping you prevent the unexpected depreciation of your plane. Prop Markers are easily installed and removed in just seconds, adding virtually no additional time to your walk around. Show line service personnel just how much you care and feel confident about leaving the aircraft. Made from UV resistant Sunbrella, custom bonded with a soft, non-abrasive inner fabric. The compact design and shock cord allow for quick and easy storage without tangling.

Spend less time worrying about jeopardizing the safety of you and your passengers. Featuring light reactive trims and tapes, these highly reflective Prop Markers are made to improve the visibility of your prop and aircraft day or night, helping you prevent the unexpected depreciation of your plane. Prop Markers are easily installed and removed in just seconds, adding virtually no additional time to your walk around. Show line service personnel just how much you care and feel confident about leaving the aircraft. Made from UV resistant Sunbrella, custom bonded with a soft, non-abrasive inner fabric. The compact design and shock cord allow for quick and easy storage without tangling. This prop marker fits aircraft such as a Cessna 150/152 or similar two blade aircraft with small nose cone. See our nose cone comparison picture for your reference. Alternatively, please contact us for advice specific to your aircraft.

Spend less time worrying about jeopardizing the safety of you and your passengers. Featuring light reactive trims and tapes, these highly reflective Prop Markers are made to improve the visibility of your prop and aircraft day or night, helping you prevent the unexpected depreciation of your plane. Prop Markers are easily installed and removed in just seconds, adding virtually no additional time to your walk around. Show line service personnel just how much you care and feel confident about leaving the aircraft. Made from UV resistant Sunbrella, custom bonded with a soft, non-abrasive inner fabric. The compact design and shock cord allow for quick and easy storage without tangling. This prop marker fits aircraft such as a Cirrus SR22, Cessna 206, Cessna 182, Piper Malibu, Beech Bonanza, Beech Barron or similar three blade aircraft with medium size nose cone. See our nose cone comparison picture for your reference. Alternatively, please contact us for advice specific to your aircraft.

The blazing yellow colour of this foot-long, ANSI-compliant and weather-resistant reflective streamer stands out equally well in daylight or darkness under all weather conditions, so it can’t be missed. Each streamer comes complete with eight inches of size-adjustable, highly visible reflective shock cord and safety clips. The cord is attached to the streamer with a rugged black oxide coated zinc eyelet. These features make the streamer ideal for any remove-before-flight application, including gear pins, cowl plugs, AOA indicator cages, TAT, ice detector and static port covers. .

Every two years, over 8 percent of aircraft suffer ground damage. Now there’s a simple, low-cost way to greatly reduce the risk of delays and disappointments due to “ramp rash” damage. Highly reflective markers make vulnerable wing and elevator tips clearly visible under all conditions, and their projecting “proximity fuses” warn that something is too close before damage occurs. Plane Sights universal wing and elevator markers fit all aircraft from Airliners to light sport aircraft, including models with static wicks and strobe lights. For aircraft with tip tanks, the wing marker opening fits over one end of the tank. Plane Sights aircraft markers are available in sets of two to five pieces, for fitting to wing tips elevator tips and propeller blades. A full set, including its free carrying pouch stows under most aircraft seats. Once initial fitting is done, the markers can be installed and removed in seconds during routine pre- and post-flight walk-arounds.

This durable, weather-resistant orange and yellow reflective cover fits virtually any size pitot tube. It stands out in daylight or darkness under all weather conditions, so it can’t be missed. Universal covers fit any length of tube from the smallest home built ¼” tubes to the largest 1” corporate jet probes. The versatile hook/loop Velcro strap with sewn-in rubberized trim allows the cover to be quickly and securely fastened to the pitot tube. *PSTS*

This full wing and elevator marker set was the original Plane Sights aircraft marker concept. Still to this day some owners prefer the added visibility and attractiveness of these fitted covers over our Universal Aircraft Markers. Since the elevator of a DA40 is at the same height as Cessna wing tips making them more obvious is especially important in crowded hangars and congested aprons. DA40 wing tip strobe lights are also at risk as they stick out past the wing tip edge and are obscured by the tip itself. We have discontinued this model, but have ONE SET LEFT IN STOCK, which includes left and right fitted wing tip markers, left and right fitted elevator covers and a custom carrying pouch, also discontinued. (Set does not include Three Blade Medium Prop Marker, which is the style that’s needed for a DA40)